Calibration

Calibrate the range of motion for the sticks and knobs. This process establishes the physical limits of the sticks, knobs and sliders for the firmware. Do this when the transmitter is new, when the firmware is upgraded and every year or at the start of each flying season.

The process is the same for both the Taranis Q X7 and X9 series of transmitters. Follow the instructions on the screen to the end. Do not exit the process part of the way through.

Taranis Q X7 Series

Taranis X9 Series

  • Centre the sticks, sliders and knobs
  • Press ENTER
    Move the sticks to the four corners
  • Move the sliders and knobs back and forth to their limits
  • Press ENTER when done